Jordan V.
Clean look no leaks
Sergey S.
SPE good quality, easy to install, sensor needs to be moved, but it's not a problem, looks great, I like SPE products, this is not my first purchase from SPE, in the photo you can see how many updates I made on my 6.7 powerstroke
David H.
Great product! Easy install! Massive upgrade over stock parts!
Stephen P.
I purchased the SPE Motorsport Cold Side Pipe which uses an anodized throttle body adapter and flexible 5-ply silicone hose. The adapter has multiple ports that gives you the ability to add other sensors to the boost at any time to read boost reference. The The 6.7L Diesel engine has a cold side intercooler pipe the 5-ply hoseĀ increases reliability, durability, and performance. The kit includes a billet anodized aluminum throttle adapter with 3 reference ports. The throttle body adapter retains the factory air intake valve thusĀ allowing you to retain your truck's factory emissions components, thus making for an effortless install. In the picture, you can see the sensor and wires sticking up from the adapter.Ā The throttle body is now aluminum instead of the factory composite. Another major change to the hose is the increase in diameter going up to 3ā from the factory 2.5ā designed billet aluminum throttle body adapter.
The kit contains: Silicone hose, Anodized throttle body adapter, O-Ring, T-Bolt Clamps (2), NPT Plugs (3)
I went out for a 150-mile test trip to see if all of these mods working together are improving MPG, driving at 77mph with the engine running at 1,800 RPM in 6th gear using 18-inch tires, all of the different mods together has increased the mileage from 15 to 19 mpg. A 2,100 road trip this year to Pittsburgh will be proof that this increase in MPG has been impacted by changing out OEM parts with after-market replacement upgrades. That has been the goal from the start is to increase MPG, a 4,000 mile round way trip at 15 mpg using $4 per gallon fuel equals $1,066.67. Increasing the MPG to 19 decreases the cost to $842.11. A savings of $224.56. Paying $5 a gallon saves $280.70 on your round trip. I replaced the diesel fuel tank that increased the tank size to 68 gallons or an additional 20 gallon increase. On a road trip that allows you to skip high fuel taxes in some states, the difference between $2.92 per gallon in Texas versus Pennsylvania at $4.15. That 19 mpg times a 68-gallon tank is over 1,200 between fill-ups. Back East that is a couple of states you can drive right thru with no need for any fuel stops.
Brandon S.
Easy install, great fit. Best part is not having to worry about the stock one blowing out anymore.
Christ G.
Fast shipping Chance is the man!! While the silicone hose is does stretch. Was a snug fit but also was a sense of security once I hot it on. All parts fit greatā¦.
Robert R.
Great fit and sturdy parts. Far better feel and appearance than stock and a great fix for hose blow out
Chris L.
As can be seen here, I had the cracks of death on my OE Ford Cold Side Charge Pipe. The OE pipe made a mess.
Replaced it with the SPE unit. Perfect fit, easy install, fixed the problem. While you're under the hood fixing the pipe, consider cleaning/replacing the MAP sensor and the CAT sensor.
Ethan K.
Installation is easy. Parts are good looking and high quality. My gas mileage seems to have gotten better as well. Went from 12 mpg to 15. Happy with the part
Brian O.
Better quality than stock, itās a must change on any 6.7.
Darren H.
The quality of the parts is beyond my ability to explain. Installation was quick and easy. SPE will be my go-to for all future needs, I couldnāt be more satisfied.
Randy F.
It was a good fit and had great finish to it. Only issues were with the original hose clamps on existing stuff. I just had to take it all apart and orient the clamps. It fit right up again and works great.
Troy B.
Looks good holds up to more than 30 lbs of boots without blowing
Chad W.
The cold side pipe fits perfectly. It was a 10 minute install.
Dustin M.
Easy install, very high quality part, no more traveling with a spare cold side pipe in my toolbox, coolant and hot side pipes are up next!
Dustin W.
Easy install and quality products. Found a video on YouTube from SPE which made it even easier! I am a very novice mechanic and this took me 30 mins.
Josh B.
Easy to install & looks great
Ron C.
Easy to install and looks very nice.
Ken R.
Fast shipping Great product and easy to install.
Nate M.
The SPE Cold Side Intercooler Pipe fit great. It was an easy install took about 30 minutes, and it looks awesome. As always, SPE knocked it out of the park.
Kevin G.
I accidentally had the shipping address wrong and I ordered really late at night but I still sent them an email, when I woke up I got a notification saying they fixed it and I got some candy in my package so I gotta say great service and people!
Curtis H.
Fit like a glove, shipped insanely fast, and is very high quality as always!
John G.
Great product. Much more solid and reliable than the factory equipment which is prone to fail. Plus flows better. A must if you plan to run a tune.
Eugene K.
Watched a few videos on it very easy to install clean look as you can see in the pictures will buy more products from this company / at the same time, I bought the radiator hose kit and installed it. That was very easy to install. I see a few people said they had problems, but it went on like a piece of cake. next kit is the disaster prevention kit but Iām gonna buy
Carlos G.
Quick shipping. No missing parts. Excellent fit and finish.
Mike W.
Perfect fit with upgraded Intercooler 2019 F350 DRW KING RANCH!! Best looking and quality on the market SPE!
dustin p.
Great quality product, only took 10 minutes to install.
Jacob S.
Looks sharp, and super easy install. Took about 30 minutes
Brandon T.
Fit as it should. Seems to be of high quality.
Vinson J.
Everything fit as it should, really durable product!
Guy F.
I am not a mechanic, but was able to install the pipe. Not realizing how little room there is to snake the pipe around the power steering reservoir I found it a bit difficult to start the pipe onto the lower end. But once installed it fit perfectly with adequate clearance around the pipe. It works as expected and appears to be far more substantial than the factory installed pipe.
Ron O.
Aloha, relieved my cold side pipe. Looks nice and well constructed everything looks top notch! Will send a review this week, haven't had time to install it. I just installed my delete ccv kit, I had ordered an extra hose. Ran it in the frame to the rear axle, cannot smell any burnt off exhaust. Awesome, self consciously knowing the engine/turbo is burning cleaner. Mahalo Ron.
Chris M.
Easy install and far superior to the OEM pipeā¦ took 10m to install.
Gilbert R.
Great product, very well built, install went smoothly. My wife enjoyed the airhead candy. Nice to support a local business.
Rick P.
Perfect fit added security of no break downs on the road !
DYLAN W.
Product fitment was spot on. Fast easy install. Less then 15mins. Even without provided instructions...
Joshua F.
If I had known how easy of an install this was I would have done it sooner. It looks and functions great, very pleased with it.
Gary C.
Well built and designed. Little bit of a fight to get it on the intercooler, but nothing too bad.
Ken D.
Great fitment. Easy to install. No more future worries about boost leaks or problems
John M.
Straight forward installation. The directions I printed from the web site were very helpful. A little dielectric gel on the bottom of the hose makes install much easier
carlos a.
My original cold side pipe gave out on me while heading home, once I arrived, I popped the hood to see why I had a check engine light, the dang pipe had multiple cuts on it from west and tear, lucky it got me home in one piece in AZ heat! SPE had this master piece in stock so I went for it, amazing craftsmanship and fit! Thanks folks, I just ordered a T-stat and upper radiator hose to replace my now collapsing stocker.
Robert .
Asked a Facebook group which cold side pipe was the best as mine burst that day. Tons of people said SPE so i started researching them. Talked to Amy and was sold! Extremely fast shipping and the quality of the pipe was beyond what people were saying. I highly recommend and will be buying more pieces to my puzzle from them soon. Great customer service! Thank you!
Jon J.
Shipping was faster than promised. I was out of town and it arrived at my house before I did! Installation was straight forward and easy especially with the online instructions. I've run about 1k miles since the installation and my fuel economy and power have improved noticably.
Jason F.
Great product! Easy installation, fast shipping, this is the 6th product I've purchased from them. Will continue to buy all my parts from them.
Brandon M.
Easy Installment. Perfect Fitment!
Jaime Z.
Shipped really fast, quality of parts it's a lot better than expected. Really love SPE quality, can't wait to order more parts. Thank you...
Ryan .
Unbelievable how fast the shipping was! Ordered Thursday morning, had it Friday afternoon! Instructions were clear, concise, and very easy to follow. Excellent customer service and product!
Terry N.
Quick shipping and delivery and the install was fast. Looks great.
J K.
There are two reasons I didn't give it five stars is that the intercooler side of the hose was ridiculously difficult to install. 1.)There isn't much room to install it in my '17 F250. If the diameter of the hose on the intercooler side was slight bigger, it would be easier to install. 2)I had to reuse the factory spring clip. For the price, it should have a new spring clip. Even Sinister Diesel includes one in their kit.
Norma H.
Just as described.
Easy to install.
Fast shipping. Thanks!!
Noah P.
Install was easy and very straight forward. SPE provides wonderful instructions as well. Quality of the product is great, everything fit perfectly into place and looks amazing. Looking forward to ordering from SPE again!
Troy M.
Replaced my bad plastic Intercooler line with SPE AND it works great
Lewis R.
I got my SPE cold air kit very quick and was excited, still havenāt been able to locate a factory one yet!! My factory pipe blew! Was a little tuff for me to get the bottom on but once I did it was a breeze and looks awesome. Thanks for being there and getting me back on the road!!
Cameron H.
Fit and finish is great. Took me an hour to remove the factory pipe, clean up the ends, and assemble and install the new pipe. I especially like the high-quality clamps that were included and that the factory retaining ring drops right in. Would recommend to any 6.7 Powerstroke owner.
Chris
Was great working with the SPE Team. Their products are amazing and the quality is top notch. In addition the packaging was very good to ensure everything came as it was designed.
Ryan W.
Huge improvement in quality versus factory components.
Stephan H.
Very good quality and very simple to install.
Make sure you tighten the clamps good and check them after driving the vehicle.
Kenneth D.
Fantastic product!!!
Hugh P.
Easy to install i can tell its good product just by the way it fills
Charles E.
First let me say ordering was easy, shipping was faster then I expected it to be and thanks to Amy and your team will be back to buy more great stuff, waiting for the full emissions intake manifold!
Danny D.
Great quality looks very nice thank you
George P.
Great fix for the problematic OEM Cold Side Pipe! Great look to engine bay as well!
Jerrod J.
Amazing quality. The instructions are clear and precise.
Joshua W.
Amazing quality and fitment. Well worth the money. Donāt think my charge pipes are blowing off now! Thanks SPE!
Statten K.
Lower side of hose was really tight. Not sure if it was suppose to be that tight. All in all itās still better then stick by far
Rodolfo C.
Looks great and works amazing!
Nick R.
Always the best with SPE!!! There parts are Amazing!! Quality and customer service exceeds my expectations!!
Troy H.
Super easy to install. Throttle response seems quicker. Good quality parts.
Nainoa M.
Thank you guys so much!!! I blew up my plastic oem one and your guys shipping was on point and parts were made of the highest quality. My only concern was I had to take the inter cooler out because the cold side pipe was so hard to slip in with it on the truck. Other than that love the product. I canāt wait for your intake manifold kit to get back in stock to make my engine bay immaculate
Jared C.
Fast shipping and great quality!! Will definitely be buying more from them!
Ryan K.
Perfect fit, quality piece, fast delivery, repeat customer.
Craig G.
Installation was a breeze. Superior when compared to OEM and gives peace of mind.
Corey C.
Great product, very smooth install, Iāve been purchasing a lot of SPE products for my Powerstroke and all of them have been high quality!
Kordan W.
Makes truck look slick! Donāt have to worry about the worry of blowing the factory cold pipe off!
Valentin A.
Good product easy install need paper instructions but everything else perfect
Peter C.
Great service. Nicely machined!
chris w.
Super easy install. Great knowin thatās another factory part that will never fail me.
Michael J.
Been too cold to install it. Checked the connectors which was my big concern. Had the factory one blow off last summer . Fortunately did not rip the hose. have been searching for a replacement and found this one. Expected Great quality, like the pump kit I bought awhile back.
Nick
Second product from SPE and love it, quality fit and finish and the look is much better than factory
Aubrey H.
Bought as insurance and it does not disappoint! Looks amazing and install was super easy!
GUADALUPE M.
This is so easy to install..
I travel from South Texas to North Texas every week 8 hrs each way..now I don't worry about getting stranded I'm also getting the Hot Side pipe. If you own a 6.7 Powerstroke, you need this piece of mind
Noah P.
Installed in about 45 minutes. Looks great!
William S.
Great fit. Installed in less than 15 minutes. Looking forward to many more years of service
Richard V.
Awesome piece highly recommended
Jerad E.
Over all it is a good product. better than stock. The Billet housing could have tighter tolerances. Mine wobbles pretty good. I'm afraid as the o-ring wears, I could possibly lose boost pressure. The bigger issue is where the factory sensor plug in. Mine would not stay in place. I had to use RTV to get it to hold with out blowing out.
Mitchell T.
Components installed on a 2020 F450. Have been monitoring data on a Bank iDash for some time now and thought I had a great running truck with only 22k on the clock. However, after installing both the cold and hot side CAC tubes, I now have a better throttle response and significant increases in boost pressure. These psi gains are at much lower EGTs than ever before. Even seeing 9-10 psi under engine brake on, deceleration conditions, flat Florida ground, with a nominal 18k load. In summary, must have had a leak somewhere with a faulty o-ring and must have picked up flow efficiency with the larger diameter hot side. Either way I think this was money well spent. Will by more from SPE. *Install tip ā add a little of that dielectric grease not only to the o-rings but to the silicon hose ends for much easier installation.
Josh S.
Ordered this kit and had it next day SPE always comes thru when I need parts and this kit is well made and works great ! Definitely Better than some kits Iāve used in the past on my previous 6.7ās. Canāt wait to get the full piping kit next great job SPE!!
John B.
SPE quality is very good. If SPE doesn't make it for my 6.7L I probably don't need it.
Carter B.
SPE is always greatā¦ No complaints about any of their products especially this one. Brothers truck blew a hole in this pipe at 65k so just did one on both mine and his. Super easy to install and fits perfectly. First one took 30 minutes, second one took 10 minutes.
Ben K.
Blown my factory cold side pipe on my way home from a hunting trip 3 hours away from home. Wasnāt even giving it hell just down shifted to pass a car cruising 75 and boom. I already had spe cold side in my cart. Ordered it and dang it was here next day awesome shipping and it looks amazing! More spe parts to come for sure..
Timothy E.
easy to install, perfect fit
Marlyss H.
Arrived very promptly! Love the fit and look and ease of installation!! Itās nice to not have to worry about the stock one cracking on long trips! Thank you SPE!
Randy L.
Great fitment and the billet throttle body adapter finish work is amazing
Nicholas H.
Installed the cold side pipe on my 2018 F350 6.7 diesel and it works great! Install was very easy and product and parts are high quality. I will try and use more of the companies products, if can afford to do so. Great product!
Roy H.
Quality product. Appearance is great. Installing was easy. Instructions want you to clock your sensor down so ports face up. My fan shroud interferes with the sensor so I couldn't.
JOSHUA G.
Super easy install, looks much better in the truck that the factory piece. Made install of an aftermarket intercooler possible. Solid build quality, will be getting the hot side pipe soon too!
Jeff C.
Multiple dealers telling me my 2016 f250 truck is fine with not holding boost and getting avg 12 mpg. I swapped out intercooler pipes, now it holds boost and get an avg of 18.5mpg. Great replacement part even if your truck runs perfect. Would even recommend to ford for future models to include.