Josh T.
Perfect fit!! Love SPE products!! Run a 250hp tune and I feel this kit, in conjunction with, the SPE piping kit allows it to get all the air it needs to get the most out of the truck. Huge difference from stock as far as airflow, and just looks amazing! Thank you SPE!
Robert H.
Great product the installing was ok not to bad just the clamps were a little tricky but I love it
Nicholas C.
Install was fairly easy and it looks great. Had a leak on the compressor side and replaced the oem with this pipe. Only trouble was limited access to tighten the clamps but otherwise no problem.
Michael D.
Quality item. I buy SPE because they do it right. I now have many SPE products on my F350 and Iāll continue to put more on
Gerry G.
Waiting to get the other parts for the project.
Cody S.
If you are doing the CCV delete and have to remove the Hot side pipe anyways why wouldnāt you go ahead and replace it with a superior product. The fit and finish is outstanding.
Wesley A.
Super easy install on my 15 6.7. Great product to go along with all my other SPE items. Bonus is I feel like I gained a little bit throttle response.
Sergey S.
Thanks to the SPE team, the quality is better than the OEM part, easy to install
Stephen P.
I purchased SPE Motorsport Hot Side Intercooler pipe and installed it on a 2019 F-350 4-door SWR LWB. This pipe has a 3ā diameter aluminum pipe that is larger than stock OEM pipe. This design has a black aluminum adapter that utilizes a 5mm O-ring to improve the seal to the turbo compressor outlet, this adapter retains the factory snap/quick connect ring for ease of installation.Ā Next is the 5-ply silicone coupler which is attached to the adapter and then to the aluminum 3ā tubing with 2-T-bolt clamps on both ends of the silicone coupler to ensure a strong connection. At the other end is another flex coupler (for the intercooler side) which is reinforced with a metal ring in the center giving this coupler even more strength. Also using 2-4 t-bolt clamps to ensure a solid connection on both ends of the flex coupler.Ā In the center connecting the 2 5-ply silicone couplers is the 3ā T6 aluminum tube to complete the run from turbo to inlet on the intercooler. The SPE Hot Side Pipe was bent with the least amount of angles as possible, this design reduces restrictions in flow. All of the work done to improve/upgrade the F-350 is either to improve MPG while driving solo or while towing a 40 ft trailer. Improving the MPG by just 2mpg decreases the cost of a 4,000-mile round trip by $143 utilizing $4 per gallon cost of diesel without towing a trailer. If towing and MPG goes from 10 to 12 mpg that savings is $333 per round trip all based on $4 per gallon the savings increase dramatically at high diesel fuel costs. All of this will still allow you to pass annual emission testing to relicense your truck.
Bryan L.
Easy install, better design than OEM, less restriction, and looks good. Satisfied.
Byrd C.
After much research and being a full time mechanic I will say I do not just pick any replacement parts out there.SPE has done a great job improving all the factory style components and there short comings! Keep it up guys as I have more parts coming and parts on stand by to be installed
joel c.
Fits well, very easy and quick to install. Better quality than factory part.
Erik S.
Would recommend to anyone
Joseph H.
Always easy to install and love spe products
Charles R.
Now I am not that mechanical but this was pretty easy. 55 yo Vet with some issues moving around so if I can do it you can too. Thanks Chance for the help and fixing my initial screw up, ordered wrong part. A few days to get it then 30 min to put it on. Look forward to getting more from SPE Motorsport.
Charles R.
Thanks SPE Motorsport for the help. I messed up and went cheap and paid the price for it. Ordered a new pipe and it was the wrong piece. SPE helped and fixed my mistake. All good now. Installed it in about 30 minutes. Had some issues but did it and it looks great. Now will have to get the cold side next. Thanks again Chance and everyone at SPE Motorsport.
Rick P.
Easy installation adds some beef to the stew
Alan C.
The charge pipe was fairly easy to install and better design and materials than the OEM one I removed. It is also easy to remove, I replaced my intercooler shortly after installing the charge pipe and installed a sep ccv reroute/internal catch can and a sep disaster prevention kit. The disaster prevention kit was the most difficult to install, not the kit itself but because of the poorly designed Ford components I had to remove to install the disaster prevention kit. The sep products were all well engineered and of top quality materials, thanks SEP.
Tyler W.
Amazing quality! Iāve ran it for a couple days through heat cycles and checked the bolts/fitment. I do feel like it gave it a little more pep in the mid range when you give it the gas.
Josh B.
Easy to install & looks great
joshua S.
Very nice quality components in this hot side replacement kit. It fit perfectly and directions were very clear with pictures.
Jordan G.
Very good quality product from a great company. Shipped my order out within a couple hours after ordering.
Timothy C.
Easy install , instructions were straight forward. Make sure you become very familiar itās soap and water trying to maneuver that pipe to position.
John G.
Great product. Much more solid and reliable than the factory equipment. Plus flows better. A must if you plan to run a tune.
Paul W.
Well machined , everything you could want.
Noah
Love the hot pipe, is extremely well made.
Benjamin B.
The parts supplied to install the pipe all went together well. It might be helpful to have a bracket to relocate the fuel filter bracket a little bit. It was a very tight fight getting the hose onto the new adapter. Thanks to the thoughtfulness of design i was able to make it work. The folks at SPE are amazing and their products are high quality!!
Ryan O.
Very good quality and significantly noticeable improvement in mid range power!
Ryan O.
Well worth the money! Large noticeable improvement in the lower to mid range!
Mark R.
Insanely fast shipping, and always respond to emails promptly. I wonāt shop elsewhere if I can help it.Thanks guys!Mark
Bill S.
Fit perfect and looks good. Solved my boost leak
Patrick R.
The fit and finish are great.
Troy M.
Changed hot side pipe works great
Noel J.
I love the plug & play fit of SPE parts. My Hotside intercooler pipe for my Powerstoke fits good, looks great and performs perfect.....
Chris
Was great working with the SPE Team. Their products are amazing and the quality is top notch. In addition the packaging was very good to ensure everything came as it was designed.
Ryan W.
Quality materials used, easy install, it looks great.
kelly d.
Once i installed the pipe I was amazed at how much better my truck ran. I got on it and felt the torque. Great part!!!
Danny D.
Very nice product easy install
Carlos C.
The best product
Skylar P.
Awesome product! Install was quick and painless. The rubber O-ring in the kit is far superior too the OEM one. Fit and finish is 2nd to none! Love SPE products!
Joshua W.
Amazing product. Incredible quality and well worth the price. I am buying everything I can get my hands on from SPE!
Richard P.
Package arrived as described, well packed and protected. Had to wait a few days to install but things went together well and the truck looks and runs great with this installed. I will make a comment on the number of thanks I received from the various depts. It is a fine model for customer service excellence. I will be looking at your other products as time allows.
torey s.
Great product, great instructions and easy to install!!
J. W.
Good installation instructions, looks classy! Slight performance boost
Craig G.
What a nice add on! I think it is a must have.
Marty G.
Replaced an aFe pipe with the SPE Motorsport pipe because the aFe pipe kept blowing the boots off since installing the SPE pipe Iāve gained a tenth in fuel mileage and the performance is excellent truck runs better and the boots donāt blow off.
Nate H.
Great quality and easily added to your truck with no tuning.
Nick
Just wrapped up my install of the hot side pipe. Love the look of the polished pipe. The pipe definitely is much better quality than factory!
Aubrey H.
Install was a breeze and looks amazing under the hood. Well worth the investment!
Robert N.
Fits nicely!! You can feel the difference in how it seals compared to the oem pipe. The seal that comes with it, is a firm seal.
William S.
Great fit. Installed it in 15 minutes. Awesome product. Light years ahead of original design.
Shaun D.
Like the way it looks and next I will be putting on the SPE piping kit to go with the hot side. To make it easier for others I tightened the clamp before I slid the piece onto the turbo.
Jerad E.
Hot side went in great and definitely better than stock.
Nick R.
This hot side pipe is like a sore johnson!! You just canāt beat it! The price, the quality of the parts, the upgraded o-ring etc! Truly changes the look and performance of the truck!!
Mitchell T.
Components installed on a 2020 F450. Have been monitoring data on a Bank iDash for some time now and thought I had a great running truck with only 22k on the clock. However, after installing both the cold and hot side CAC tubes, I now have a better throttle response and significant increases in boost pressure. These psi gains are at much lower EGTs than ever before. Even seeing 9-10 psi under engine brake on, deceleration conditions, flat Florida ground, with a nominal 18k load. In summary, must have had a leak somewhere with a faulty o-ring and must have picked up flow efficiency with the larger diameter hot side. Either way I think this was money well spent. Will by more from SPE. *Install tip ā add a little of that dielectric grease not only to the o-rings but to the silicon hose ends for much easier installation.
kyle w.
Great quality! Install was a breeze and fitment was great!
Brian D.
Excellent material and hardware. Very good products from SPE!
Paul S.
Easy install however I suggest you install and tighten the turbo side sleeve before clicking it in. It can be rotated once installed. Great item!
Thomas R.
Hi quality product
You can see my the pic I installed it incorrectly. Had to flip it
The long side goes to the turbo
Great fit
Another great product from SPE
Jeff C.
Multiple dealers telling me my 2016 f250 truck is fine with not holding boost and getting avg 12 mpg. I swapped out intercooler pipes, now it holds boost and get an avg of 18.5mpg. Great replacement part even if your truck runs perfect. Would even recommend to ford for future models to include.
Luis G.
Give the truck the nice under the hood look
Ken H.
Nice product. Watched a video and picked up on some helpful tipsā¦dry fitting and getting clamps oriented just right on the turbo side with the collar oriented as so the retainer clip is accessible is important. I just happen to be now taking off both upper and lower intake in order to clean and change turbo oil tube and coolant tube, so found it easier to remove the hot side to get the upper intake off, so being i orientated the retainer clip, it was easy to pull back off. I highly recommend this product. Only downer is no window sticker!!!
Jon J.
Great product, all high quality parts. Fit as factory OEM, looks great.
Replaced my aging factory hot air tube and hoses that had heat/pressure cracks that caused loss of turbo boost pressure.
Noticeable difference with sound and boost pressure gain.
Carlos R.
Easy enough to install. Make sure to lube ends before trying to assemble as they grab and won't slide on.
Bryan S.
Replaced my sinister pipes for these babies, better fit, less clamps, tighter fit too!
Zach Z.
Products are top quality what was expected and more. Good solid addition to the truck good power gains throughout power ban and looks great!
Adam S.
It looks and fits great. I did notice better acceleration, but Iām not sure on performance since my factory one had a slight leak on the bottom of the turbo side that I couldnāt see while it was on.
Randy A.
Replacing another subpar factory part goes great with my intake pipes from SPE!
Bret F.
Great fit, worked very well
Anatoliy L.
Good Quality I loved. Thank you guys
Tony C.
Hot side pipe went in with no issues. Instructions were ok, you tube had quite a few videos so I wasnāt concerned. Definitely makes the engine bay look better, and I donāt have to worry about the crappy stock one failing.
Julian G.
Received my order in a few days a quality is way better than oem couldn't be happier.
brandon l.
Excellent fit and very good quality parts
Dwayne S.
Good product only issue I had was one of the boots started cracking on the edge and pieces started coming off of it during the install.
Justin P.
Went on well Instructions were easy to read. Got my lost boost back!!
Dustin A.
Great product much more increase compared to the factory. Again parts are great quality. Set some time aside when doing this one. The hose clamp to the turbo is a time consuming one but I recommend doing dry fits before tightening all down.
Ben L.
Nice hose replacement. But make sure you follow torque spec on clamps. Nuts easily strips on T-bolt. Had to reuse one of my original clamps because they are a little beefier.
Tim S.
Nice product. The fit wasn't the greatest, it is jammed up against the intake horn. I had to take a screw driver and shove the clamp in between the intake and the new pipe boot.
Christopher M.
Easy install and looks great!
lisa p.
Took 15 minutes to install . Such a beefy set up it looks so good ! Now my 6.7 can eat properly !!! Thank Spe
Ethan G.
Straight forward install, pretty tight fit but what isnāt in these motors? Definitely helps clean up the engine bay more! Clamps, boots, and pipe itself are extremely sturdy and built to last.
Jim G.
The quality is second to none. Tubing is nice a thick, perfectly bent. Brand X tubing collapsed at the end under the clamp with the heat. I think my problem is solved with this quality product. Thanks for making it right
Edye R.
Awesome product!! Always to perfect fit.
Ryan G.
Tight fit but very nice
george c.
Fairly easy to install and looks great!!! A lot more air flow!
joel j.
Installed with the coldside kit and very easy to install. It was a tight fit. The entire kit is very high quality. Overall the engine bay has a much cleaner look.
Justin f.
Super easy to install. Looks much better too! The couplers are way heavier than oem too
Jack H.
Nice easy install and looks great
John K.
Product is excellent, donāt follow instructions given, google how to install much earlier
Austin C.
Great quality products, will continue to buy from SPE!
Eric D.
Fits perfectly. Easy install makes a great match to my cold side.
Albert A.
Great product and looks good under the hood
Bruce G.
I didn't share a photo or picture because I haven't installed it yet. It came right before I went on vacation and didn't want to do it before I traveled.
Shaun M.
Looks good, havenāt installed yet. I bought the cold side a few months back but it was missing the 3 aluminum plugs, I requested but havenāt heard back
Joel K.
Awesome part!! Backed up by even better people!!
Bryce C.
I would love to install all my stuff but I'm still waiting on my cold air intake to get in I ordered may 22nd
Ryan G.
Parts were packaged very well to prevent scratching. Easy to install. SPE never disappoints
Jared M.
Looks great! Install is pretty easy other the hose clamps, threads on hose clamps could be a little longer if ease of installation.
